The Assist Slim is smaller and lighter with a shorter run time, designed for performance foiling. It offers enough power for assisted foiling, while remaining super compact!
More info
The Assist Slim is smaller and lighter with a shorter run time, designed for performance foiling. It offers enough power for assisted foiling, while remaining super compact!
WHO RIDES THE SLIM?
At just 35mm thin, the Assist Slim is engineered for the performance orientated rider. No matter if its ripping turns on a prone board, sending downwind missions in bombing conditions, enabling smaller gear winging, or extending a pump foil session, the Assist Slim is a high-performance machine.
With reduced battery capacity comes shorter runtimes, however despite its size, the Assist Slim with the Performance battery packs quite the punch, still able to launch heavier riders up on to foil with ease.
With its low weight positioned optimally under your board, once you’re up on foil you will hardly notice you still have it mounted up to your gear at all!
INSTALLATION
The Assist Slim mounts between your mast plate and the board. As mast tracks are universal, this means it fits any board!
Simply use the provided Foil Drive Locking T Nuts and longer bolts. Sandwich your Gen2 Foil Drive between your gear for optimal weight distribution and hydrodynamics.
Note: Boards with Carbon Tracks like the Armstrong FG boards are experiencing connectivity issues. We are working on a solution for this.
REMOVABLE MOTORS
With three simple screws, the motor plug can be removed, allowing the rider to change their cable length and therefore motor mounting position depending on the use case.
With options to use your own foil mast or a fully integrated option, there are more ways to tune your setup than ever!
The kit includes everything you need to turn your existing foil and board into an electric assisted foiling machine!
WHAT'S INCLUDED
Endurance Battery: Nominal Voltage: 28.8 V Max Voltage: 33.6 V Rated Capacity: 8.4 Ah Rated Capacity: 241.92 Wh Battery Weight: 1.4kg (3lbs) Certifications: UN, CE, IP68 Battery Dimensions: 410x75x21mm
Gen2 Motor with 2 Blade Propeller/Hub and Stubbie Cooler
Mast Adaptor: Please indicate the adaptor you need in the order's note.
Foil Drive Assist Slim Electronics Box
Motor Plug Protector with Keychain
Foil Drive Nose Cone C
Foil Drive Nose Cone D
Foil Drive Universal Motor Pod - Rear
Foil Drive Universal Motor Pod - Short Nose
Foil Drive Universal Motor Pod - Long Nose
Foil Drive v2 Wireless Throttle Controller
Foil Drive Controller Wrist Strap
Foil Drive Mast Cable Guide 23cm
Foil Drive Controller Wireless Charge Pad
Micro USB Cable
40v Standard Foil Drive Charger 4amp
Power Lead (AU, US or EU)
4x Mast Track Foam Inserts
2x Nose Cone Rocker Pad
2x Battery Grease
4x M8 Assist Slim Mast Plate Bolts 60mm
4x M6 Assist Slim Mast Plate Bolts 60mm
Foil Drive 2.5mm Driver
Torx T40 Tee Handle Driver
Torx T30 Tee Handle Driver
Foil Drive Cleaning Cloth
Foil Drive Gen2 Carry Case
Foil Drive Mounting Bolt Bag:
4x M8 Locking Tee Nuts
4x M6 Locking Tee Nuts
4x M34 x 20m Bolts for Locking Tee Nuts 2x M3 x 16mm Latch Locking Bolts
Foil Drive Motor and Pod Bolts Bag:
4x Motor Pod Bolts (M3 x 12mm)
3x Puck Bolts (M3 x 12mm)
3x Motor Plug Bolts (M4 x 10mm)
Spare Parts Bag:
2x O-Ring Seals - Foil Drive Assist Slim
2x Latch Assembly - Foil Drive Assist Slim
3x Motor Plug Bolts (M3 x 12mm)
4x Motor Pod Bolts/Puck Bolts (M3 x 12mm)
2x Latch Locking Bolts (M3 x 16mm)
2x Propeller Bolts (M3 x 30mm)
2x Latch Pivot Bolts (M3 x 45mm)
COMPATIBLE WITH
Universal Motor Systems for Gen2
Project Cedrus Integrated Mast for Gen2
AXIS Integrated Mast for Gen2
TECH SPECS
Maximum Thrust: 25.5kg (56.2lbs)
Weight Range: 2.3 - 2.8kg (5.0-6.1lbs) depending on battery
Max. Dimensions: L510 x W125 x H35mm
Min. Dimensions: L415 x W125 x H35mm
Operating Voltage: 40V
Runtime (Generalised): 20min-2hrs depending on use case, battery and other variables.
Recharge Time: Appx. 1hr (Performance Battery)
Batteries: IP68 rated dust and water resistant.
