Ocean and Earth Dakoda Walters Lite Trac Black

Ocean and Earth Dakoda Walters Lite Trac Black – Dakoda's surfboard tail pad shape is a throwback to surfing inspired by the 80andrsquo;s and 90andrsquo;s. Kodes' surfing is lighting fast and his pad has all the features to get you flying. If that wasn't enough Kode's tailpad now comes in Lite Trac construction this construction is compressed and includes a moulded traction pattern technology making the pad lighter and grippier than our original EVA traction pads. Length: 330mm Width: 300mm Pieces: 3 Arch: 7mm Power Kick: 25mm Tread Pattern: Multi Directional Lite Trac.

What’s in the box:

• 1 x traction tail pad (multi-piece)

• Self-adhesive backing (pre-applied)

FAQ:

Q: How do I install a tail pad?

Thoroughly clean and dry the deck of your board. Peel off the protective backing, position the pad carefully – the kick should align with the tail – and press firmly from the centre outward to remove any air bubbles. Allow at least 24 hours before surfing to ensure a strong bond.

Q: How do I know if this tail pad will fit my board?

Most tail pads fit a wide range of board tails. Check the specifications and compare with your board’s tail width. If in doubt, a slightly smaller pad is easier to trim than one that overhangs.

Care and maintenance:

• Rinse with fresh water after use to remove salt and sand.

• Clean periodically with mild soapy water; avoid petroleum-based solvents.

• Check the adhesive edges regularly and re-glue any lifting sections with contact cement.