Sales of Duotone and Core products to the United States are temporarily suspended
FRK Swallow 2026 – Designed for waves 5 foot and under, Dan Mann designed the FRK Swallow to be the most versatile in performance in the FRK range.
Limited availability: 25 unit units
Warning: Last items in stock!
Availability date:
Meet the newest addition to the FRK quiver. Crafted to unlock performance in waves 5' and under, Dan Mann designed the FRK Swallow to be more versatile in its performance characteristics than any other FRK shape that came before it. Built with I-Bolic 2.0 Core with Fiberglass Lamination.
Designed for waves 5 foot and under, Dan Mann designed the FRK Swallow to be the most versatile in performance in the FRK range. With an emphasis in better distributing the volume directly beneath the surfer's stance, the FRK Swallow excels at creating speed in flat, sticky sections, without sacrificing on-rail performance. Meant to be ridden 2" shorter than the FRK and 1" shorter than the FRK+. Despite Dan's original design intention to optimize the FRK Swallow for smaller waves, the team quickly validated its performance versatility in everything from knee-high T Street to well-overhead Oaxaca.
Compared to the rest of the FRK quiver, Dan worked to better distribute the volume directly beneath the surfer's stance, updated the outline and rocker profile, and worked with Kelly to amplify the effect of the outline in the back third of the board against the all-new rocker curves. This rail rocker through the back third of the board was specifically paired with a swallow tail to enable precise rail work uncommon in small wave shortboards. Each tip of the swallow tail enables hold beyond what a squash tail would allow when carving on rail, because of the surface area reduction in the last several inches of the board when compared to a squash tail.
| Length | Width | Thickness | Volume |
|---|---|---|---|
| 5'6" | 18 1/2" | 2 3/8" | 25.7L |
| 5'7" | 18 9/16" | 2 3/8" | 26.3L |
| 5'8" | 18 5/8" | 2 7/16" | 27.4L |
| 5'9" | 18 7/8" | 2 1/2" | 29L |
| 5'10" | 19 1/16" | 2 9/16" | 30.2L |
| 5'11" | 19 1/4" | 2 5/8" | 31.94L |
| 6'x 19 3/8" x 2 11/16" x 33.25L | |||
| 6'1" | 19 9/16" | 2 11/16" | 34.6L |
| 6'2" | 19 11/16" | 2 3/4" | 36.1L |
| 6'4" | 20 1/8" | 2 13/16" | 38.7L |
Use the size chart above as your guide — volume (litres) is the most reliable indicator for fit. Beginners and heavier surfers generally benefit from more volume, while experienced surfers can ride lower volumes for greater performance. When in doubt, go slightly larger for everyday waves.
Check the product specifications for the exact fin system and compatible fin templates.
This board is built with I-Bolic 2.0 Core with Fiberglass Lamination.
For small surface dings, use a solar-cure ding repair kit, available at most surf shops. Sand smooth once cured. For larger or deeper damage, consult a professional shaper or board repair specialist. Always repair dings as soon as possible to prevent water from entering the foam core.
Rinse your board with fresh water after each session. Avoid prolonged exposure to direct sunlight when not in use, as UV and heat can damage the foam and resin. Store your board in a padded bag away from heat sources. Repair any dings or cracks promptly with a solar-cure repair kit to prevent water ingress into the core.
DID YOU FIND A BETTER PRICE? TELL US WHERE YOU FIND IT BY SENDING US YOUR LINK AND WE WILL MAKE THE SAME PRICE!