Singleton – The Singleton is Taylor Jensen's nose rider model that he rides on the World Longboard Tour, a testament to it's range and use in a variety of conditions.
More info
Singleton
A collaboration between past Icons of Foam Shaping Champion Stu Kenson and 4x World Longboard Champion Taylor Jensen. With a blessing and introduction from Dan Mann, Taylor and Stu went to work on designing a modern nose rider that Taylor has been riding on the World Longboard Tour in 2024. Built with Helium Core with Fiberglass Lamination.
Wave Type
The Singleton is Taylor Jensen's nose rider model that he rides on the World Longboard Tour, a testament to it's range and use in a variety of conditions. Recommended in waves 1-6' surf, and will work in just about any conditions.
Board Features
A modern nose rider outline, designed by Taylor Jensen and Stu Kenson. The bottom contours flow gently from a single concave in the nose to a slightly rolled bottom thru the the middle and flat out the tail, making this board very user-friendly.
Available Sizes
| Length | Width | Thickness | Volume |
|---|---|---|---|
| 9'4" | 22 1/2" | 3" | 73.0L |
| 9'8" | 23 1/4" | 3 1/8" | 80.4L |
Frequently Asked Questions
What size should I choose?
Use the size chart above as your guide — volume (litres) is the most reliable indicator for fit. Beginners and heavier surfers generally benefit from more volume, while experienced surfers can ride lower volumes for greater performance. When in doubt, go slightly larger for everyday waves.
What fins work best with this board?
Check the product specifications for the exact fin system and compatible fin templates.
What technology is this board built with?
This board is built with Helium Core with Fiberglass Lamination.
How do I repair a ding?
For small surface dings, use a solar-cure ding repair kit, available at most surf shops. Sand smooth once cured. For larger or deeper damage, consult a professional shaper or board repair specialist. Always repair dings as soon as possible to prevent water from entering the foam core.
Care & Maintenance
Rinse your board with fresh water after each session. Avoid prolonged exposure to direct sunlight when not in use, as UV and heat can damage the foam and resin. Store your board in a padded bag away from heat sources. Repair any dings or cracks promptly with a solar-cure repair kit to prevent water ingress into the core.
Package Contents
- 1× Singleton