JP Allroundair SE 3DS 11'0" 2021 Inflatable SUP

ALLROUND - FOR ALL

This board was born to provide a taste of all the possibilities in Stand-Up Paddling, with the bonus of being a safe step into this world. It comes in 4 different technologies.

A narrower nose allows for minimal push of the water in the front, resulting in a faster glide with each paddle stroke.

The parallel outline ensures great traction and less paddle-hand changes. This also brings another advantage - a wider tail that significantly improves the stability of the board.

A great recommendation for those who are not sure of what kind of board to buy.

The Tail Rail Edge enhances the performance of the boards by allowing a quick water release.

This technology is featured on the SE 3DS and LE 3DS models.

Key Features:

• 3D Stringer (SE3DS and LE3DS only)
• Tail Rail Edge (SE3DS and LE3DS only)
• Welded Seam Technology (except SL)
• Bungee rope
• Stability for all kinds of riders
• Triple Layer Composite Drop Stitch (SE 3DS only)
• Double Layer Drop Stitch (except SE 3DS)

Technology:

SUPERIOR EDITION 3DS: The 3 pre-laminated composite layers consist of 2 airtight PVC sheets bonded to a Polyester 1000D fabric to create one super strong shell.

This shell is then machine laminated directly onto the 500D Polyester Drop Stitch fabric.

The pre-lamination and the composite structure create an unprecedented weight/stiffness/durability ratio ever produced in an inflatable SUP.

The SE 3DS boards are offered in 6? thickness, with the exception of the SurfAir 9'7"x32" (4" thick).

• Rail: Outside rail layer glued over the first layer for added stiffness and abrasion resistance.
• Triple Layer Composite Drop Stitch: The 2 PVC layers make sure your JP Inflatable is 100% airtight, and the Polyester 1000D fabric in between them creates a super durable composite stretch-resistant structure.
• Inner Rail: First rail layer that is welded to the DS fabric to ensure long-lasting mechanical bond
• 3D Stringer: The 3D stringer is the most innovative solution to increase the stiffness of an inflatable board (+ 30%). The 3D Stringer increased the glued overlap surface in the high high-stress standing area, increasing the safety of the boards.
• Pre-Lamination: Our Triple Layer Composite and our Double Layer constructions both include the specially developed process of pre-lamination. Compared to normal double layer boards we have been able to remove the manual glue application from the process and with it the room for error, the excess weight of the glue and the additional health hazards for our workers. The fiber-reinforced layers create super strong and durable boards with a minimal amount of stretch.

Sizes: 10'6" | 11'0" | 10'6" Version 5"