Sales of Duotone and Core products to the United States are temporarily suspended
Filters
STABILITY. SURF. SEND IT. Surfy control, locked-in flow.
Trust the foil. Chase the flow. Own every session.
UNLOCKS HIGH-END PERFORMANCE FOR EVERYONE. If one foil could do it all, this would be it.
EXCALIBUR: YOUR ALL-CONDITIONS EDGE. Trust the foil. Chase the flow. Own every session.
NO FLEX. NO FILTER. JUST PURE CONNECTION. When you’re chasing the sharpest edge of performance, you need gear that responds like it’s part of you.
FIND YOUR NEXT GEAR. You’ve found your feet—now sharpen your edge.
The UNION APEX mast is an ultra high modulus carbon mast offering superior stiffness and minimal drag.
The UNION mast is a high modulus carbon mast offering incredible stiffness with low drag.
Its combination of quick acceleration, efficient speed, and explosive release makes it ideal for kite foiling and Big Air sessions.
The Cabrinha Prestige Front Wing is designed for riders seeking the pinnacle of efficiency and control.
The Cabrinha Whippit is built for riders who want maximum liveliness and maneuverability from their foil.
The Naish Siren 2026 complete foil, paired with the High Modulus Carbon mast and S-Series stabilizer, is a high-performance setup designed for riders seeking smooth control, efficient glide, and precise responsiveness.
The Naish Excalibur complete foil setup, combining the Excalibur front wing, High Modulus Carbon mast, and E-Series stabilizer, is built for riders who want maximum speed, glide, and efficiency with a highly precise and connected feel.
The Performance X Carbon Mast 12mm is a deliberate choice for riders who prioritize glide, speed and refined turning feel over maximum stiffness. Ideal for downwind, fast winging, and clean carving lines.
The Armstrong Performance Mk II Carbon Mast is the core performance mast in the range, designed for riders who want a direct, responsive feel without compromise.
Our original mast re-engineered. A stiff carbon mast at an accessible price.
Foil used by our staff in excellent condition, with no damage and/or repairs.

High-performance F-ONE foil setup designed for maximum glide, speed and efficiency. Combining the Eagle X front wing, Monobloc Tail Downwind 145 and HM Carbon Mast 14 mm, this package delivers exceptional pumping efficiency, direct control and fluid carving for downwind and high-performance foiling.

Code Foils Race 119 Tail – a dedicated high-performance racing stabiliser in higher-modulus carbon. Area 119, span 420 mm, aspect ratio 14.8. Built for glide, efficiency and stability at speed.
Code Foils Race 100 Tail – a dedicated high-performance racing stabiliser in higher-modulus carbon. Area 100, span 400 mm, aspect ratio 16.3. Built for glide, efficiency and stability at speed.
Code Foils Aluminium Mast Stem 75cm – high-stiffness parallel extruded aluminium mast stem, 120mm chord and 18.7mm thickness. Designed for shallow water, prone surf and time in the impact zone.
Code Foils Aluminium Mast Cover 80cm – A protective cover tailored specifically for the Code Aluminium Mast, a durable case for transport and storage protection, custom fit for the 80cm mast.
Code Foils Aluminium Mast Cover 75cm – A protective cover tailored specifically for the Code Aluminium Mast, a durable case for transport and storage protection, custom fit for the 75cm mast.
Code Foils Aluminium Mast Bolt Kit Set – The complete bolt kit for assembling the Code Aluminium Mast system, supplied in a custom Code Foils mesh bolt bag with the dedicated T30 tool.
Code Foils Aluminium Mast Base Plate – The Base Plate mounts the Code Aluminium Mast to your board, with a slotted design and hole spacing engineered to adapt seamlessly to Foil Drive systems and a deep female mast connection for rigidity and load distribution.
Code Foils Aluminium Mast Top Socket – The Top Socket connects the front wing and fuselage to the Code Aluminium Mast, using long interlocking teeth and a deep connection architecture to eliminate play and maximise responsiveness.
Code Foils Aluminium Mast Stem 80cm – high-stiffness parallel extruded aluminium mast stem, 120mm chord and 18.7mm thickness. The true all-rounder.
Code Foils Aluminium Mast 75cm – Complete – full mast pack (stem, base plate, top socket, bolt kit and cover) in Code-level aluminium, 120mm chord and 18.7mm thickness. The 75cm height suits surf and downwind. Compatible with the Code ecosystem and Foil Drive.
Code Foils Aluminium Mast 80cm – Complete – full mast pack (stem, base plate, top socket, bolt kit and cover) in Code-level aluminium, 120mm chord and 18.7mm thickness. The 80cm height suits surf, parawing, wingfoil, tow foil and Foil Drive. Compatible with the Code ecosystem and Foil Drive.
The Speed S208v2 - Designed for maximum speed, while providing the pitch stability required for powered riding, the S208v2 is recommended for riders pushing high speeds with faster front wings.
The Speed S178v2 - Designed for maximum speed, while providing the pitch stability required for powered riding, the S178v2 is recommended for riders pushing high speeds with faster front wings.
Front wing used by our staff, in good condition, with only minor signs of normal use.

A hydrofoil is an aerodynamic appendage, similar to an airplane wing, which, when attached under a kite or wing foil board, allows the board to lift off the water, reducing the friction generated by the water and consequently increasing the board's planing speed. It consists of a vertical mast and a horizontal fuselage, which connects the front wing and the rear wing, also known as the stabilizer.
In our online shop, you will find hydrofoils made from various materials, each with specific characteristics that influence performance, weight, and durability over time. The main materials used are:
In rare cases, stainless steel, titanium, or plastic are also used, typically in certain parts of the fuselage or attachments to ensure greater strength.
The choice of foil depends on various factors, including the rider's experience level, sea conditions, and the type of discipline practiced. If you're into wing foil and looking for a hydrofoil for this sport, we will try to guide you based on your experience level on what characteristics it should have.
If you're a beginner, prefer hydrofoils equipped with:
Additionally, if you're not ready to make a big investment, beginner-friendly models made from more affordable materials (like aluminum and fiberglass) are great options. Some models also feature a design aimed at improving error tolerance, maintaining absolute stability even at low speeds. Before hitting the water, it's important to know the basic Wing Foil techniques to avoid being overwhelmed by the waves.
If you're a pro rider, the advice is to choose a hydrofoil that fits your wing surf style. In general, we recommend foils with:
For those with experience and who practice dynamic disciplines like racing or freestyle, we recommend advanced materials like carbon, which helps reduce weight and improves speed and rigidity.
To make your choice easier, you can also purchase one of our complete wing foil packages online, which include wing surf boards, wings, and hydrofoils, along with all the necessary accessories for their operation.
Among the most well-known brands in the sector, there are some that are particularly focused on foils, such as Armstrong, AFS, and Sabfoil, while others, like Duotone, North, and F-one, produce not only foils but also other watersports products. Let's take a look at some of the strengths of the "pure players" and the more well-known brands.
Armstrong is a brand that is becoming a market leader, producing components suitable for all needs and experience levels, ensuring great compatibility between all product lines.
Some of its major strengths include the choice of materials. The brand produces hydrofoils for wing foil made from carbon, stainless steel, and titanium (for example, the fuselages have titanium cores), eliminating common corrosion problems due to exposure to seawater and making the use of grease on surfaces unnecessary. In addition to the excellent material choice, other advantages are:
AFS is an emerging brand that is gaining significant market presence and is continuously growing. It also produces high-quality items compatible with all product lines.
A unique feature of the brand is its commitment to releasing products only after extensive testing phases, meaning all AFS hydrofoils are reliable and safe, while also offering an excellent quality-price ratio. It's important to note that the brand manufactures:
Among the mainstream wing foil brands, F-one is undoubtedly the one with the most focus on the world of foils.
It offers a wide range of products, all very versatile and suitable for kitesurfing, downwinding, and surf foiling.
Some of the distinctive features of this brand include:
Thanks to the right Hydrofoil, you can make the most of any condition, even on borderline windy days. If you love the waves and prefer the cold season to practice this sport, we suggest these 5 best winter spots for wing foil.
Buy your foil online at the best guaranteed price and take advantage of free shipping on orders over €59.99 within Europe.