Manera Magma Meteor Hooded 6/4 FZ 2023

The Magma is built for the cold and windy winter days.
The Magma+ is one of the best material out there. Not only does its fleece work as an effective insulator and heat generator, but it is also manufactured to be extremely flexible to keep even the thickest suit very stretchy. In addition, it dries 30% faster than a classic fleece. You’ll never have to put on a wet wetsuit again.

It is the wetsuit of your choice if you don’t want to stay home during winter.

Key Features:

• Front Zip
  Fast and easy front zip entry for a maximum comfort while riding.
• Magma fleece Plus
  The new MAGMA+ is from a new generation of thermal materials. Its fleece insulates and keeps you warm even during the worst winter days.
• SD2 Tape 2.0
  This new stitching process brings more durability, waterproofness and flexibility to our wetsuits.
• Back knee emboss
  It helps the neoprene bend more naturally for greater comfort.
• Water strainer
  The leaky and perforated neoprene drains the water out of your leg instantly.

Technology:

Designed In 3D
When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory.

It creates a natural, second-skin fit that makes the MANERA wetsuits stand out.

- A GOOD FIT MEANS EVERYTHING -

Warmth: No water entry, no air pocket.
Durability: The neoprene is only stretched when moving.
Comfort: No overtight areas, comfortable armpits/crotch.
Style: Folds will never be fashionable.

Strategic structure
Some areas are very sensitive to frictions, tensions and tears. All MANERA wetsuits have been designed with a demanding brief including:

. Avoiding seams in tension areas to maximize flexibility and strength.
. Making sure the seams are stretched vertically and not sideways.
. Removing seams from friction areas to avoid rashes and increase stretch capacity.
. Reinforcing strategic parts and panels right where it needs to be.

Sealing prints
Sealing prints make the ankles and wrists stiffer. It has a joint role that keeps the water away and maintains the arms and legs panels in place.

Back knee emboss
The back of the knees is an area that requires specific care. The Back Knee Emboss helps the neoprene bend more naturally for greater comfort during flexion of the knees.

Water strainer
A wetsuit leg filled up with water is a very uncomfortable issue, so the MANERA water strainer panel is there to prevent it. The leaky and perforated neoprene drains the water out of your leg instantly to let you continue the session in the best possible conditions.

MANERA wetsuits use a new process to bring more durability, waterproofness and flexibility.

SD2 tape 2.0
The neoprene layers are glued together and then blind stitched (the needle does not go through the neoprene layer completely). The SD² tape is then welded to the seam by an air heater machine. This innovative process brings more durability, waterproofness and flexibility to our wetsuits.

Triplex MAGMA

The Triplex MAGMA is designed for warmth.

Re-flex skin / Protection
Air-foam / Insulation
Magma + / Warmth and fast drying

These three materials brought together create a warm, durable and comfortable wetsuit.

Magma Plus
Warmth and fast drying

• Thermal
  The new MAGMA+ is from a new generation of thermal materials. Its fleece insulates and keeps you warm even during the worst winter days. MAGMA+ is found on all parts of MAGMA wetsuits, except the arms which require greater flexibility.
• Quick-drying
  Thanks to its quick-drying fleece and its internal structure that acts as a water-draining tunnel, MAGMA+ provides the best drying time on the market. The drying time between MAGMA+ and a conventional fleece is reduced by about 30%.
• Light-weight
  Thanks to its structure and low density, MAGMA+ is about 10% lighter than a classic fleece. As it dries quickly and absorbs very little water, MACMA wetsuits are ultralight, even during use.

Recycled X10D
Being in direct contact with the skin, the inside jersey is a key part of the wetsuit. Our X10D fabric not only provides maximum stretch and lightness, but also a smooth, silky feeling on the skin. On MAGMA models, the X10D comes in recycled.

Air-foam
We have chosen to use a very light neoprene foam as we believe having less weight means improved comfort and endurance. It also features the best flex and insulation of the market, with the quilted touch you love in a Manera suit. Air-foam is limestone based.

Fusion cut
The different neoprene layers are fused on the tips of arms and legs to make it thinner and more aesthetic. It protects the inside neoprene foam (AIR FOAM) by covering it.

Phantom straps
If the water strainer panel is still not enough for you: the MANERA ankle straps are designed to be very thin so water sprays can’t take them off. They are also stiff enough to block the water from coming in, and light for a better comfort.