ION Seek Select Semidry 4/3 BZ DL 2021

These premium wetsuits feature the new Graphene Lining, which is an incredible heat conductor and makes sure you stay warm on the water.

Only high-quality materials were used to make the Seek Select the most progressive wetsuit without compromises.

The minimal panel designs guarantee limitless freedom of movement while sealed seams prolong the lifetime of this suit.

Made to explore the toughest conditions, ION added Graphene_Plush throughout the torso and legs. Hot_Stuff 2.0 lining provides additional warmth at the arms and shoulders.

Seek Select Backzip models feature additional protection pads at the shins as well as detachable leg loops to prevent water from rushing into the suit.

Features:

• Dry_Grid: Leave the water in its rightful place down below, not in your wetsuit – Drygrid absorbs up to 30% less water. As a result, the wetsuit is lighter and cooling by evaporation is reduced. Last but not least the look of the Drygrid contributes to the sophisticated detailing
  
  
• Graphene_Plush: Graphene is an impossibly light, strong and heat-conducting material. ION integrated this revolutionary material into it's new inner lining – with the highest concentration you'll find in any wetsuit on the market. The result is up to 20% more warmth compared to ION's Plasma_Plush 2.0 lining. Also, Graphene_Plush guarantees incredible drying times for your wetsuit, making sure it's always nice and comfy
  
  
• Hot_Stuff 2.0: Hot_Stuff 2.0 comes with a plushier feel due to larger loops that trap more air for heat insulation. It is the stretchiest thermo lining in ION's entire range
  
  
• Sweep_Cut: Seam-free shoulder design for increased paddle reach and shoulder rotation
  
  
• Dry_Grid: Leave the water in its rightful place down below, not in your wetsuit – Drygrid absorbs up to 30% less water. As a result, the wetsuit is lighter and cooling by evaporation is reduced. Last but not least the look of the Drygrid contributes to the sophisticated detailing
  
  
• I_Foam: The I_Foam is an extreme lightweight and stretchy neoprene foam. Thanks to the new foamed structure with more air trapped inside and a lower density the I_foam also contributes to heat insulation and better flexibility
  
  
• Maki_Tape 2.0: Highly elastic neoprene tape reinforces the seams on the lower body and commonly stressed cuff area from the inside
• Sweep_Cut: Seam-free shoulder design for increased paddle reach and shoulder rotation
• Seam_Reinforcement: All stress points are reinforced and secured by melco tape from the inside to ensure a longer lifespan of the seams
  
  
• Fused_Edges: Embossed sleeve and leg ends for a sleeker and more durable finish
  
  
• Knee Hollow Embossing: Less material at the knee bends increases the freedom of movement when bending them
  
  
• Elbow_Hollow: Less material at the crook of the arm increases the freedom of movement when bending the arm
  
  
• Water_Gate:Extra panel on the inside that seals off the back zipper and acts as a barrier preventing water from rushing into the wetsuit
  
  
• Seal_Tite: Again, this feature prevents water from rushing into the wetsuit by sealing off the cuffs and collar thanks to small rubber strips on the inside
  
  Drain_Holes: Quick water release when needed in order to combat water accumulation inside the wetsuit. The Drain_Holes are secured in place from the inside and won't expand
  
  
• Leg_Loop: Velcro patch to offer the option of attaching the Leg_loops. The loops can be wrapped tightly around the ankle to prevent water from rushing into the suit. To avoid losing the Leg_Loops when you're in the water, they feature a unique, extra-strong velcro construction
  
  
• Crash_Pads: The extra padding on the shins provides improved protection from impact