JP Adventurair SE 3DS 12'0" 2021 Inflatable SUP

JP Australia JP Australia

211153

New product

Sale! JP Adventurair SE 3DS 12'0" 2021 Inflatable SUP

The Adventurair can do it all - windsurf, white water paddling, fishing and touring.

More details

Ready for shipment in 48h - Delivery in 2/3 working days

SUMMER SALE 22

$ 926.17

$ 1,157.72

-20%

Choose a combination

By buying this product you can collect up to 91 loyalty points. Your cart will total 91 points that can be converted into a voucher of $ 18.37.

More info

EXPANDING FRONTIERS / ADVENTURE

The Scotty mounts for fishing rods, the mast plug for windsurfing, the wide array of bungee straps, D-rings and handles, Adventurair has it all!

The quad setup with four 3” short soft fins is there for those shallow river pockets or white water action. You can add the middle fin for added traction and a center fin for better upwind performance while windsurfing.

The Tail Rail Edge enhances the performance of the boards by allowing a quick water release.

The AdventurAir comes with 1x 9″ fin, 1x 10″ fin, 1x Double Action Pump and 1x Adventure Edition Roller Bag.

Key Features:

  • Tail Rail Edge
  • Welded Seam Technology
  • Bungee rope
  • Scotty Mounts
  • Windsurf Mastplug
  • Center fin

Costruction:

SUPERIOR EDITION 3DS: The 3 pre-laminated composite layers consist of 2 airtight PVC sheets bonded to a Polyester 1000D fabric to create one super strong shell.

This shell is then machine laminated directly onto the 500D Polyester Drop Stitch fabric.

The pre-lamination and the composite structure create an unprecedented weight/stiffness/durability ratio ever produced in an inflatable SUP.

The SE 3DS boards are offered in 6” thickness, with the exception of the SurfAir 9’7”x32” (4” thick).

  • Rail: Outside rail layer glued over the first layer for added stiffness and abrasion resistance.
  • Triple Layer Composite Drop Stitch: The 2 PVC layers make sure your JP Inflatable is 100% airtight, and the Polyester 1000D fabric in between them creates a super durable composite stretch-resistant structure.
  • Inner Rail: First rail layer that is welded to the DS fabric to ensure long-lasting mechanical bond
  • 3D Stringer: The 3D stringer is the most innovative solution to increase the stiffness of an inflatable board (+ 30%). The 3D Stringer increased the glued overlap surface in the high high-stress standing area, increasing the safety of the boards.
  • Pre-Lamination: Our Triple Layer Composite and our Double Layer constructions both include the specially developed process of pre-lamination. Compared to normal double layer boards we have been able to remove the manual glue application from the process and with it the room for error, the excess weight of the glue and the additional health hazards for our workers. The fiber-reinforced layers create super strong and durable boards with a minimal amount of stretch.

Sizes: 12'0"

Data sheet

Length Ft12'0''
Length cm266
Width cm36'' / 91 cm
Thickness ft/cm6'' / 15,2 cm
Fins9'' + 10'' center fin + 4x3'' fixed fins
Weight Kg13,5 Kg / 29,7 lbs
Volume Lt405

Reviews

Nobody has posted a review yet